enghas.blogg.se

1. SIMPLIFY3D PRODUCT UPDATES HOW TO
2. SIMPLIFY3D PRODUCT UPDATES UPDATE
3. SIMPLIFY3D PRODUCT UPDATES PRO
4. SIMPLIFY3D PRODUCT UPDATES SOFTWARE

I’ll set up a couple of custom macros, and I’ll up my communication timeout to 40 seconds. Click OK, go to Tools, Firmware Configuration, and let’s change a couple things. So if you need to make more advanced customizations to your firmware settings, there is one other thing you need to do first. However, it’s important to note that the only options available here are the stock firmware profiles already included in Simplif圓D. For the firmware configuration, if the changes you need to make can be done solely by using the settings in this window, then make them here.

SIMPLIFY3D PRODUCT UPDATES UPDATE

For any changes you ever need to make to the machine settings, you can change them right here for instance, my SuperPrinter 3000 has a wider build platform, it’s 300×300, so I need to update these numbers. I’ll go to the G-Code tab, I can see that both these options are already enabled. Since I know I’m going to be using this printer along with the other printers, I want to make sure my machine and firmware settings will be synced properly. My printer is called the SuperPrinter 3000. Let’s pretend I’m designing my own printer and I know it’s very similar to the Prusa Mendel, so I’ll select that profile and Save as New, which will create a new profile based on the Prusa Mendel settings.

SIMPLIFY3D PRODUCT UPDATES HOW TO

But, some of you out there may be building a custom machine or using a printer that isn’t already in the Simplif圓D database, so in that case, let’s talk about how to set this up. In most cases, you won’t need to mess with any of these settings, because as I mentioned, the default profiles in Simplif圓D have all this taken care of. I click OK, you see things are updated once again.

So if I go to Edit Process Settings and choose the Lulzbot Taz 5, and look under the G-Code tab, you’ll see this profile also has the machine and firmware overrides enabled. Now let’s check the firmware settings - we can tell that it’s now using the Makerbot/Sailfish firmware, and we can see we have the added X3G tab, which is what we would expect since these printers use X3G files.īut let’s say later in the day I want to print on the Lulzbot. You’ll see that a lot these settings have changed. I’ll click OK, and you can probably already see in the main window here that my machine settings have been updated, but let’s verify that. You’ve probably noticed this if you’ve used the Configuration Assistant before. All of the profiles you use from Simplif圓D already have this built in, making it much easier to switch between printers. So what’s happening here is that we’ve connected our process settings, machine settings, and firmware settings so that they all change together. If these boxes are checked, your machine settings and your firmware configuration will be automatically updated based on the settings you have chosen. I want to point out two areas here on the right: the Machine Definition and Firmware Configuration. In previous videos we’ve talked about how the profiles that you choose automatically adjust the process settings to what’s optimized for that printer. So you can see I have those two printer profiles loaded.

SIMPLIFY3D PRODUCT UPDATES PRO

There are two printers I am planning to use today, the Flashforge Creator Pro and the Lulzbot Taz 5. What we really want to talk about today is how Simplif圓D automatically manages these settings for you. The most common firmwares are already included. This window defines the language that your 3D printer uses to communicate. Now let’s go look at our firmware settings. On this tab you can see there are settings like what type of printer, such as cartesian or delta, and some basic things like the build volume, orientation and coordinate system. If you’re on a Mac, you would go to Simplif圓D then Preferences to get to this window. You can set up your machine settings by going to Tools, Options, Machine tab. So let me show you where both of these things can be set up in Simplif圓D.

SIMPLIFY3D PRODUCT UPDATES SOFTWARE

For the software to correctly interface with your printer, it needs to know some details about the hardware you’re using second, it needs to know how to communicate with your printer, which is typically determined by what type of firmware it’s running.